What to Expect?
We test four different aspects of EMF radiation using four different devices. We look at radiation levels throughout the home, however our main focus will be in the sleeping areas as appropriate sleep is needed for mental focus and memory, managing stress, maintaining proper body weight, boosting the immune system, and a host of other wellness needs. Some studies suggest sleep can help to prevent illness, such as diabetes or obesity.
Some of the solutions cost nothing, for example moving furniture and other solutions involve shielding with curtains or special paint or having special circuits installed so that the power is isolated by being switched off automatically at night through the circuit board.
​
2. High Frequency Radiation
-
Wireless radiation such as Wifi, cell phone towers, 5G, bluetooth and most wireless devices.
-
Ideal levels are under (70 mili volts or lower)
-
Solutions can include shielding through curtains, special paint, canopies, specialized universal mesh for construction applications and retro fit.
-
Testing device used to measure these frequencies is GEOVITAL HF Field Probe ranging up to 8 GHz. Again, as with GEOVITAL LF Field Probe, this testing method looks at the real absorption of EMR (radiation) by your actual biological body as opposed to just the space in your environment.
​
1. Low Frequency Radiation
-
Radiation that comes from plugs, wiring in the walls, mains (switches), solar power and inverters
-
Ideal levels are under (70 milli volts or lower) especially during the time and around the area of where you sleep as this radiation in high levels disrupts healthy sleep.
-
Solutions can be as simple as moving your bed to another area of the room or having a cut off switch installed that automatically turns off the power to your bedroom at night.
-
The testing device used to measure these frequencies is GEOVITAL LF Field Probe ranging between 40-60 Hz. This is a unique testing method that is more accurate and comprehensive as it looks at the real absorption of EMR (radiation) by your actual biological body as opposed to just the space in your environment.
_edited.png)
(1)_edited.png)
​
3. Dirty Power
​
-
Dirty power is a distortion of the emf shield and power going through the cable. It is a combination of RFI and EMI propagating on the cables in your house from cheap poorly designed power supplies and devices which contribute to disruption of our bioenergy and homeostasis.
-
Solutions include removal of SMART meter, minimizing cheap electronic appliances, turning off appliances before bed, installing filters, installing cut off switch as with low frequency radiation.
-
Testing range is between 0-4000 mV with ideal levels as low as possible, 100 and below.
-
Testing device used is the Trifield EM100
​
4. AC Magnetic Fields
​
-
This man made EM(F)ield continuously oscillates from the cables and plugs in your house to approximately 2 meters, but is particularly concentrated at half a meter (500mm). Part of the energy field is the magnetic field which is directly proportional to the amount of power being consumed which increases the magnetic fields measured in Gauss (G) and milliGauss (mG) or Tesla and microTesla (mT).
-
This energy field cycles into anyone or thing and disrupts cell communication and causes stress to the central nervous system . This field can interfere with other EM(F) fields like radio waves which is known as RFI
-
Solutions are particularly important for sleeping environment and include moving beds, isolating power using cut off switches as with low frequency issues and dirty power.
-
Testing range is between 0 milli Gauss and 100 Gauss with healthy range below 1 milli Gauss
-
Testing is done by Alpha Lab Inc UHS2 field meter.
